12th International
Conference on
Structural Mechanics
in Reactor Technology
|
12th International
Conference on |
|
DIVISION G: FRACTURE MECHANICS
AND
NON-DESRUCTIVE EVALUATION
(The papers with links are those received by the SMiRT 12 Secretariat at the time the Transactions went to press)
G03: Fracture Mechanics/NDE Interaction
| G03/1 |
Flaw Tolerance Considerations
for Nuclear Power Plant Component Life Extension |
| G03/2 | Defect
Acceptance Rule for In-Service Inspections in Nuclear Power Plants Heliot, J., Grandemange, J.M., Barthelet, B. |
| G03/3 | Fracture
Mechanics Evaluation of In-Service Inspection Acceptance Criteria Capurro, E., Reale, S., Tognarelli, L. |
| G03/4 | Rules
for the Evaluation of the PISC III RRT Results Crutzen, S. |
| G03/5 | The
Use of Fracture Mechanics Methodologies for NDT Results Evaluation and Comparison Reale, S., Tognarell, L., Crutzen, S. |
G04: LBB and Non-Linear Fracture Mechanics for Piping (1)
| G04/1 |
J Calculations
Under Combined Loadings for Cirumferentially Cracked Pipes and Their Impact
on Stress Classification for Fracture Assessment |
| G04/2 | Fracture
Mechanics Evaluations of Precracked Cylindrical Vessels Subjected to Limit
Load Conditions Azodi, D., Bachmann, P., Höefler, A. |
| G04/3 | Determining
the J-R Curve for a Pipe Containing a Through-Wall Circumferential Crack Smith, E. |
| G04/4 | Simplified
Method to Estimate J - Development and Application Moulin, D., Nedelec, M., Clement, G. |
| G04/5 | Elastic
Plastic Fracture Assessment Using J-R Curve by Direct Method Asta, E.P., Chomik, E. |
| G04/6 | A
New Limit-Load Formula for Ligament of Surface Crack in LBB Assessment Chen, J., Wang, Y.C., Ju, D.Y. |
G05: LBB and Non-Linear Fracture Mechanics for Piping (2)
| G05/1 | The
Effect of Axial Forces on the Conservatism of the Net-Section Stress Criterion
for the Failure of Cracked Stainless Steel Piping Smith, E. |
| G05/2 | Experimental
Investigations on Stable Crack Growth in Panels with Semi-Elliptical Surface
Cracks Wobst, K., Hardtke, K.-D., Wossidlo, P. |
| G05/3 | Stress
Intensity Factor Solution for Thin-Walled Straight Pipes DN 700 Tested Under
Bending at RT and 550°C Setz, W., Föerster, K., Grüeter, L., Bhandari, S., Deschanels, H., Faidy, C. |
| G05/4 | Evaluation
of Large Leakage Crack Effect on the Distribution of Loads in a Small Diameter
Pipe Yu, Y.J., Kim, Y., Park, S.H. |
| G05/5 | Stress Intensity Factor
for Box Components with Transversal Surface Crack Lee, Ch. |
| G05/6 | Surface
Cracks in Toroidal Shells Erdogan, F., Joseph, P.F. |
G06: LBB and Non-Linear Fracture Mechanics for Piping (3) - Leaking Behavior
| G06/1 | LBB-Analysis:
Verification of Leakage Area and Leak Rate Evaluations by Tests Bartholomé, G., Kastner, W., Keim, E., Senski, G.. |
| G06/2 | New
Experiments on Leak Behavior of Natural Cracks in Small-Bore Pipes at the
HDR-Facility Hunger, H., Grebner, H. |
| G06/3 | Flow
Rate Measurement in Cracked Plates Under Tension. Correlation with Crack
Opening Displacement Moulin, D., Aguilar, J., Brouard, D. |
| G06/4 | Development
of Sodium Leak Evaluation Method in FBR Components Tamura, K., Shimakawa, T., Nakamura, M., Kashima, K., Miura, N., Fujioka, T. |
| G06/5 | The
Concept "Leak before Break" as Applied to NPP Pipings Petrov, V.A., Timofeev, B.T. |
G07: LBB and Non-Linear Fracture Mechanics for Piping (4) - Elbows
| G07/1 | Extension
of Fracture Mechanics Evaluation Methods by Consideration of Multiaxiality
of Stress State for Piping Components Schuler, X., Blind, D., Eisele, U., Herter, K.-H. |
| G07/2 | Description
and Application of KJ Rule to Cracked Cast Elbow Integrity Analysis Taupin, Ph., Ensel, C. |
| G07/3 | Stress Intensity Factors
for Single and Multiple Cracks in Thin-Walled 90°C Pipe Bends
Under Internal Pressure and Bending Rensch, H.J., Lohmeyer, B., Hofmann, H. |
| G07/4 | Elastic-Plastic
Analysis of Longitudinally Slitted Elbow Under Closing Bending Lacouture, E. Guillouet, E., Brochard, J. |
| G07/5 | Characterization
of Limit Stress in the Ligament of a Longitudinally Cracked Elbow Under
Bending Moulin, D., Brochard, J., Goudet, G. |
| G07/6 | Fracture
Mechanics Studies on Elbows Chattopadhyay, J., Dutta, B.K., Kushwaha, H.S., Mahajan, S.C., Kakodkar, A. |
G11: Dynamic Fracture Mechanis (1)
| G11/1 | 2-Dimenstional
Dynamic Contact Fracture Analysis for Partially Opened Crack Chen, K.T., Chen, C.H., Ting, K. |
| G11/2 | Seismic
Behaviour of Cracked Pipes, Test and Calculation Comparison Blay, N., Brunet, G., Jamet, Ph., Petit, M. |
G12: Dynamic Fracture Mechanis (2)
| G12/1 | Dynamic
Fracture Analysis of HDR-E31 Pipe System Experiments Olson, R.,. Wolterman, R., Wilkowski, G. |
| G12/2 | Instrumented
Chappy Qualification on Two Ductile Materials Moulin, D., Tanguy, L., Brouard, D. |
| G12/3 | J-R
Curves and Fracture Toughness Transition Behaviour at Static, Rapid and
Impact Loading of Cr-Ni-Mo-V Reactor Pressure Vessel Steel Holzmann, M., Man, J., Válka, L. |
| G12/4 | Comparison
of Static and Dynamic Strength and J-R Curves of Various Piping Maerials
from the IPIRG-1 Program Marschall, C.W., Landow, M.P., Wilkowski, G.M.. |
G13: Fracture Mechanics of Weldments and Cladding - General Aspects
| G13/1 | Residual Stresses and
Their Treatment Within the R6 Assessment Procedure Chivers, T.C., Sharples, J.K. |
| G13/2 | Fracture
Mechanics Analysis for Inhomogeneous Material Behaviour Stumpfrock, L., Kraëmer, D., Eisele, U. |
| G13/3 | A Modified Thermal Jor
Integral for Orthotropic Composite Cracked Structures Chen, K.T., Lin, H.B. |
| G13/4 | Bonded Problems of Two
Half-Plane with Elastic Gasket and Crack Xing, L. |
G14: Fracture Mechanics of Weldments and Cladding
| G14/1 | Current
Results from the NRC's Short Cracks in Piping and Piping Welds Researcg
Program Wilkowski, G., Krishnaswamy, Marschall, C., P., Rahman, S., Scott, P. |
| G14/2 | An Effective Approach
on Welded Structure Integrity Assessment for Pressure Vessels Dong, Y.M., Ma, Q., Hwang, K.C. |
| G14/3 | An Overview of the HSST
Full-Thickness Shallow-Crack Clad Beam Testing Program Keeney, J.A., Theiss, T.J., McAfee, W.J., Bass, B.R. |
| G14/4 | Crack
Growth Assessment for a CS-Specimen Composed of RPV Base and Cladding Materials Saarenheimo, A., Talja, H., Kordisch, H., Voss, B., Neubrech, G.E. |
| G14/5 | Numerical and Experimental
Studies of Crack Growth in Cladded Specimens Sattari-Far, I. |
| G14/6 | A
New Method to Evaluate Hydrogen-Induced Disbonding Susceptibility in Stainless
Weld Overlay Lin, J., Wang, Z., Liu, C., Wu, D. |
G15:
Transferability in Fracture Mechanics Assessment
| G15/1 | A Unified Methodology
of Fracture Toughness Evaluation for Thin-Walled Nuclear Reactor Components Naumenko, V.P., Volkov, G.S. |
| G15/2 | Evaluation
of Fracture Toughness from Small Specimens Schmitt, W., Sun, D.-Z., Böehme, W., Blauel, J.G., Nagel, G. |
| G15/3 | Effect of Weld Mis-Match
on Fracture Toughness Testing Joch, J., Neale, B.K. |
| G15/4 | Fracture Toughness of
Brittle Nonmetallic Materials in Tension and Compression Naumenko, V.P. |
G19: New Techniques for Nuclear Components
| G19/1 | Quantitative Assessment
of Fatigue by Bark-Hausen Noise Analysis Yamaguchi, A., Maeda, N., Miyoshi, S., Ochiai, T., Yagawa, G., Ishino, S. |
| G19/2 | The
New Ways in NDE and Structure Integrity Fangyu, G. |
| G19/3 | Quantitataive
Plastic Deformationn Analysis by Means of Thermoplastic Effect Sun, X.W., Tu, J., Peng, R. H., Zhu, D.Z. |
| G19/4 | Infrared
Thermographic Scanning of Fatigue in Metals Luong, M.P. |
| G19/5 | Site
Ultrasonic Measuring on PRV Stud-Bold Loading Under Hot Transient of QinShan
NPP Qu, J., Dou, Y., Li, Z., Zu, S., Lu, J., Wang, Y. |
G20: NDE Techniques for Nuclear Components
| G20/1 | UT
Characteristics for Detectability of Defects for Inconel Weld Yamada, H., Akasaka, M., Takabashi J., Itoh, D., Nomura, K. |
| G20/2 | Revealing
of Defects in Anticorrosive Cladding Metal by Ultrasonic Inspection and
Their Effect on Strength by Low-Cycle Loading Timofeev, B.T., Rozina, M.V., Ulin, V.P. |
| G20/3 | A Multiparameters NDT
of the Ferromagnetic Materials Mihovsky, M., Popov, A., Velev, G. |
| G20/4 | Indication
of Creep Embrittlement in Low Carbon Components Using NDT-Methods Jansky, J., Dobmann, G. |
| G20/5 | Results
and Experiments of ISI of Austenitic and Dissimilar Welds Using SH-Waves
and Emus-Probes Hüebschen, G., Salzburger, H.-J., Kröning, M., von Bernus, L., Oellrich, K. |
GD16: ISI Management and Qualification (1)
| GD16/1 | PISC
III: A Status Report Crutzen, S., Nichols, R., Miller, A.G. |
| GD16/2 | Application
of Computer Modelling to Qualification of Ultrasonic Inspections Farley, J.M., Dikstra, B.J. |
| GD16/3 | U.S. Program to Qualify
Eddy Current Techniques and Inspectors for Nuclear Steam Generator Tubes Behravesh, M.M. |
| GD16/4 | ISI
Performance Demonstration Designed Using the PISC Know How Crutzen, S., Nichols, R., Lemaitre, P.. |
| GD16/5 | Performance
Demonstration Initiative: US Implementation of ASME B&PV Code Section
XI Appendix VIII Ammirato, F., Becker, F.L., Carr, F., Huffmann, K., Spanner, Jr., J.C. |
| GD16/6 | ENIQ:
European Network for Inspection of Qualification Crutzen, S., Kussmaul, K., Lemaitre, P. |
GD17: ISI Management and Qualification (2)
| GD17/1 | Reflection of ISI Performance
Verification in General Engl, G. |
| GD17/2 | Performance Qualification
for ISI on French PWR Champigny, F. |
| GD17/3 | Validation
Experience at the IVC and its Application at European Level Through the
European Network for Inspection Qualification (ENIQ) Waites, C., Leyland, K.S. |
| GD17/4 | The Belgian Attitude
Towards ISI Performance Verification Dombret, Ph., Hennaut, G., Simoens, Ph. |
| GD17/5 | NDT
Performance Demonstration in Spain Bollini, G.J., Yagüe, L. |
GD18: ISI Management and Qualification (3)
| GD18/1 | The
Importance of Human Factors in UT as a Result of PISC III Action 7 Murgatroyd, R.A., Seed, H., Worrall, G.M., Crutzen, S. |
| GD18/2 | Software
Tools for ISI - A New Approach Borras, M., Cabrera, E. |
| GD18/3 | The Last Development
in France in View of ISI Performance Improvement Benoist, P. |
| GD18/4 | NDT Evaluation Projects
in the Netherlands and Their Implications for Performance Demonstration
and Other Regulations V. Leeuwen, W.H. |
| GD18/5 | Different Approaches
to Personnel Certification within European Standards Whittle, M.J. |
GF01: Pressurized Thermal Shock (1)
| GF01/1 | Fracture
Mechanics Analyses Including Constraint Investigations on Reactor Pressure
Vessels Under Pressurized Thermal Shock Loading Sievrs, J., Liu, X. |
| GF01/2 | Crack
Initiation and Arrest in a PTS Test for a Model Pressure Vessel Made of
VVER-440 Reactor Pressure Vessel Steel Keinänen, H., Talja, H., Rintamaa, R., Ahlstrand, R., Nurkkala, P., Rajamäki, P., Karzov, G.P., Blumin, A.A., Timofeev, B.T. |
| GF01/3 | Integrity
Assessment of DOEL 1 and 2 Reactor Pressure Vessels Under Pressurized Thermal
Shock Loading Gerard, R. |
| GF01/4 | Warm
Prestress Effects in Fracture-Margin Assessment of PWR-RPVS Shum, D.K.M. |
| GF01/5 | Calculated
Warm Prestress and Shallow Crack Effects in a PTS-Transient Rajamaeki, P. |
| GF01/6 | Evaluation of Effect
of the Yielding Range at Warm Prestressing on the Behavior of Crack Initiation Xuejun, F. |
GF02: Pressurized Thermal Shock (2)
| GF02/1 | Design
of a Cruciform Bend Specimen for Determination of Out-of-Plane Biaxial Tensile
Stress Effects on Fracture Toughness for Shallow Cracks Bass, B.R., Bryson, J.W., McAfee, W.J., Pennell, W.E., Theiss, T.J. |
| GF02/2 | Fracture
Mechanics Analysis of Reactor Pressure Vessel for Emergency Core Cooling
and Fluid-Fluid Mixing Bartholomé, G., Keim, E., Schöepper, A. |
| GF02/3 | Vessel
Pipestress: A New Solution for Pressurized Thermal Shock Ayres, D.J., Barishpolsky, B. |
| GF02/4 | The
Effects of Cladding on Propagation of Finite-Length Flaws in PTS Analysis Keeney, J.A., Dickson, T.L. |
| GF02/5 | Analysis
of Reactor Pressure Vessel Nozzle Cracks Subjected to Cyclic Pressure and
Transient Thermal Stress Loads Using the P-Extended Finite Element System
PEXFE-3D Pammer, Z., Szabolcs, G. |
| GF02/6 | Prestressing
Reduces Crack Propagation Risk in Embrittled Reactor Vessels Kornfeldt, H., Töernblom, L., Köernvik, L.-A. |
GF08: LBB and Non-Linear Fracture Mechanics for Piping (5) - Components Testing
| GF08/1 | Large
Scale Experiments to Support the Application of the LBB Concept to WWER
440 Reactor Piping Zd'árek, J., Pecinka, L., Joch, J., Kadeka, P., Palyza, J., Brumovsky, M., Svoboda, V. |
| GF08/2 | LBB-Analysis:
Verification of Fracture Mechanics Approaches by Components Testing Bartholomé, G, Wellein, R., Senski, G. |
| GF08/3 | Leak-Before-Break-Behaviour
of a Piping System DN 415 Subjected to Transient Loading by Water Hammer Kussmaul, K., Kobes, E., Diem, H., Schrammel, D. |
| GF08/4 | Precracked
Pipe Under Waterhammer Action Brosi, S., Niffenegger, M., Reichlin, K., Kobes, E., Schrammel, D. |
| GF08/5 | Crack
Initiation and Crack Growth of Large Diameter Pipes under Cyclic Bending
Loading Stoppler, W., Strum, D., Hippelein, K., De Boer, A. |
GF09: LBB and Non-Linear Fracture Mechanics for Piping (6) - Components Testing
| GF09/1 | Tests
of Large-Scale Specimens and Models as Applied to NPP Equipment Materials Timofeev, B.T., Fedorova, V.A. |
| GF09/2 | Exclusion
of Rupture for Welded Piping Systems of Power Stations by Component Tests
and Failure Approaches Julisch, P., Sturm, D., Wiedemann, J. |
| GF09/3 | Leak-Before-Break
Tests with Carbon Steel Pipes Ikonen, K., Kukkola, T. |
| GF09/4 | Fracture
Properties Evaluation of BOP Piping Systems for the Yonggwang 3&4 Nuclear
Generating Station Kim, Y.J., Choy, Y.S., Seok, C.S., Yang, K.M., Ra, I.A., Ahn, H.Y. |
GF10: LBB and Non-Linear Fracture Mechanics for Piping (6) - Components Testing
| GF10/1 | Tests
on Large Scale LMFBR Piping/Part I: Crack Resistance Properties of Through-Cracked
Straight Pipes DN 700 Tested Under Bending at RT and 550°C Setz, W., Föerster, K., Bhandari, S., Debaene, J.-P., Faidy, C. |
| GF10/2 | Tests
on Large Scale LMFBR Piping/Part II: Analysis of Through Cracked Straight
Pipes DN 700 Tested Under Bending at RT and 550°C Bhandari, S., Deschanels, H., Sperandio, M., Faidy, C., Setz, W. |
| GF10/3 | Leak-Before-Break
Evaluation of a Typical Pressurized Water Reactor Primary Loop Pump Casing Swamy, S.A., Witt, F.J., Petche, J.F., Kroes, B. |
| GF10/4 | Pipe
Break Testing of Primary Loop Piping Similar to Department of Energy's New
Production Reactor - Heavy Water Reactor Poole, A.B., Clinard, J.A., Battiste, R.L., Hendrich, W.R. |
| GF10/5 | Leak
Before Break Evaluation of BOP Piping Systems for the Yongwang 3&4 Nuclear
Generating Station Yang, K.M., Kim, Y.J., Field, R.M. |