12th International Conference on 
Structural Mechanics in Reactor Technology


 

DIVISION L: INELASTIC BEHAVIOUR OF SOLIDS AND STRUCTURES

(The papers with links are those received by the SMiRT 12 Secretariat at the time the Transactions went to press)


L01: Thermal Cyclic Plasticity (1)

L01/1

Behavior of a Stainless Steel 17-12 SPH Under Anisothermal Cyclic, Uni and Bi-Directional Anisothermal Loadings
Bouchou, A., Delobelle, P.

L01/2 High Temperature Thermomechanical Fatigue of 1.4914 Type Steel
Wolter, F., Petersen, C.
L01/3 Prediction of Inelastic Response of a Ni-Based Superalloy Under Thermal-Mechanical Cyclic Loading
Olschewski, J., Sievert, R., Qi, W., Bertram, A.
L01/4 Multiaxial Isothermal and Thermal Cycling Tests of AISI 316 L(N) Austenitic Steel Tubes
Windelband, B., Schinke, B., Munz, D.
L01/5 Study on Simplified Estimation of J-Integral Under Thermal Loading
Takahashi, Y.

L02: Thermal Cyclic Plasticity (2)

L02/1

An Experimental Analysis of Thermomechanical Behaviour of a Cu-Zn-Al Shape Memory Alloy
Chrysochoos, A., Pham, H., Maisonneuve, O.

L02/2 A Viscoelastoplastic Study of Thin Cylinder Subjected to a Thermal Cyclic Loading
Wielgosz, Ch., Bergere, D.
L02/3 The Cyclic Constitutive Description on the Temperature History Effects for AISI 321 Stainless Steel
Yang, X., Gao, Q. Sun, X.
L02/4 Method of Determination of Steady Plastic Cycles Under Cyclic Loads
Pycko, S.
L02/5 Inelastic Simulation Analysis of Crack Propagation Under Bending Fatigue at Elevated Temperature
Fukuda, Y., Satoh, Y., Fujioka, T., Kashima, K.

L03: Inelasticity - Constitutive Equations (1)

L03/1

Calibration of the Parameters of the Nonlinear Kinematic Elastoplastic Model from Mechanical Tests
Migne, C., Pellissier-Tanon, a., Thomas-Solgadi, E.

L03/2 Mathematical Restriction and Creep-Plasticity Interaction in Unified Constitutive Models
Zhengfang, Q.
L03/3 High-Temperature Creep and Cyclic Deformation Behaviour of AISI 316 L(N) Austenitic Steel and Its Modelling with Unified Constitutive Equations
Haupt, A., Munz, D., Scheibe, W., Schinke, B., Schmitt, R., Sklenicka, V.
L03/4 The Fast-Reactor State Variable Model for Cyclic Inelastic Analysis of Type 316 Stainless Steel
White, P.S.
L03/5 Finite Plastic Deformation of Single Crystals
Bertram, M.

L04: Inelasticity - Constitutive Equations (2)

L04/1

A Dislocation Model of Plastic Yield in Fuel Pin Cladding Materials
Ford, I.J.

L04/2 Elastic-Plastic Behaviour of Conductors Subject to Electromagnetic Field
Podolak, K.
L04/3 Stress Analysis of Nuclear Reactor Fuel Elements Subjected to Pressure, Creep, and Irradiation
Hibbeler, R.C., Mura, T.
L04/4 A New Approach to Determine the Zircaloy Constitutive Equations Under Irradiation
Rougier, Y., Bretheau, T., Zaqui, A.

L05: Inelasticity - Damage and Failure Models (1)

L05/1 Creep-Fatigue Damage Assessment by Subsequent Fatigue Straining
Yaguchi, M., Nakamura, T., Ishikawa, A., Asada, Y.
L05/2 CDM Model of LCF Under Nonproportional Loading
Chen, X., Gao, Q., Sun, X.
L05/3 Fatigue and Creep Crack Growth Behaviour at High Temperatures for Weld Metal of Alloy 800 and Alloy 617
Rödig, M., Choudhary, B.K.
L05/4 A Study of Creep Damage Parameters in Creep Cavity Growth Dominant Region Under Creep-Fatigue Loading
Ueno, F., Aoto, K., Wada, Y.
L05/5 Ceep-Fatigue Evaluation Method for Mod. 9Cr-1Mo Weldment
Asayama, T., Hasebe, S., Hirakawa, Y., Wada, Y.

L06: Inelasticity - Damage and Failure Models (2)

L06/1 LCF Prediction for Stress Concentration Zone at Nominal Stresses Outside Elasticity Limits
Poroshin, V.B., Gokhfeld, D.A., Sadakov, O.S.
L06/2 Creep-Fatigue Deformation on Curved Tubes of Hastelloy XR Under In-Plane and Out-of-Plane Bending
Kaji, Y., Muto, Y.
L06/3 The Dependence of Damage on Internal Variables and its Incorporation into Constitutive Equations
Aktaa, J., Munz, D., Schinke, B.
L06/4 Variation of the Young Modulus with Plastic Strain Applying to Elastoplastic Software
Morestin, F., Boivin, M.
L06/5 Creep Modelling and Lifetime Prediction for Nickel-Base Single Crystals at High Temperatures
Bertram, A., Olschewski, J., Sievert, R., Zelewski, M.
L06/6 Life Prediction of Pressure Vessel Nozzles
Giglio, M., Loconte, A., Vergani, L.

L07: Inelasticity - Damage and Failure Models (3)

L07/1 Inelastic Deformation and Fatigue Under Complex Loading
Wang, C.H., Brown, M.W.
L07/2 A Localized Fatigue Damage Analysis During Uniform Strain Cycling Conditions
Zhenyu, D., Xunfag, S., Qing, G.
L07/3 Lifetime Evaluation for Reactor Steels Under Low-Cycle Loading at Complex Stress State
Giginyak, F.F., Lebedeva, A., Dragunov, Y.G., Getmanchuk, A.V., Titov, V.F., Rogov, M.F.
L07/4 Effect of Air Environment on Creep-Fatigue of Some Commercial Steels
Sigiura, T., Nakamura, T., Ishikawa, A., Asada, Y.

L08: Cyclic Plasticity and Ratcheting Phenomena (1)

L08/1 Ratcheting Phenomena
Hübel, H.
L08/2 Ratcheting in Pressurised Pipes
Charles, I.D., Harvey, S.J.
L08/3 Deformation Behaviour of Structures Exposed at Very High Temperatures to Cyclic Thermal and Mechanical Loadings
Breitbach, G., Schmidt-Plutka, A., Schubert, F., Nickel, H.
L08/4 Life Prediction Technique for Ratcheting Fatigue
Asada, Y., Namaizawa, J., Ueno, K., Ishikawa, A.
L08/5 Interaction Between Ratcheting and Creep
Philip, O., Taleb, L., Cousin, M.

L09: Cyclic Plasticity and Ratcheting Phenomena (2)

L09/1 An Estimation Method of Thermal Racheting of Cylinder Subjected to Short Travel of Temperature Distribution
Kitade, S., Ueta, M., Kanoaka, T., Wada, H., Igari, T., Ogawa, K., Jinbo, M.
L09/2 A Cyclic Constitutive Law for Metals with a Semi-Discrete Memory Variable for Description of Ratcheting Phenomena
Andrieux, S., Shoenberger, P., Taheri, S..
L09/3 Strain Enhancement in Piping in Relation with Fatigue Analysis
Berton, M.N., Martin, P., Poette, C.
L09/4 Remarks on an Experimental Plane Shear Test and on an Anisotropic Elastic-Plastic Theory
Tourabi, A., Wack, B., Guelin, P., Favier, D., Pegon, P., Nowacki, W.K.
L09/5 Proposed Modification of Plastic Ratcheting Limits in Section III of the ASME Code
Porowski, J.S., Danfelt, E.L., Bielawski, G., Badlani, M.L.

L10: Structural Analysis and Computational Aspects (1)

L10/1 Reactor Mechanics and Diagnostics in Hungary
Szekeres, A., Palfalvi, I.
L10/2 Effects of Dead Load on Ductility of a Floor System
Fujisaki, E., Sarkar, B.E., Ho, H., Reed, J.W.
L10/3 Fundamental Study on Seismic Behavior of Cell-Liners
Takiguchi, K., Hotta, H., Nakamura, S., Irei, T.
L10/4 Estimation of PWR Lower Head Failure Times Using the Method Astor
Eisert, P., Gruner, P., Kuntzem W.M.
L10/5 Inelastic Behaviour of Cylindrical Containment Structures on Unilateral Support
Janas, M.
L10/6 The Impact Plastic Torsional Buckling of Cylindrical Shell Under Pre-Static External Pressure
Wang, D.Y.

L11: Structural Analysis and Computational Aspects (2)

L11/1 Elasto/Vicso-Plastic Deformation of Moderately Thick Shells of Revolution Under Thermal Loading Due to Fluid
Takezono, S., Tao, K., Aoki, T., Inamura, E.
L11/2 Brittle-Rupture Mechanisms of Axisymmetric Plates Subject to Creep Under Surface and Thermal Loadings
Ganczarski, A., Skrzypek, J.
L11/3 Inelastic Behaviour of Metals and Metallic Structures
Marincek, M.
L11/4 Deforming and Fracture of Graphite Structural Members Under Thermal and Radiational Loading
Cherniavsky, A.
L11/5 Structural Model of Graphites Deformation Behaviour: Interaction of Rheological and Fracture Processes
Gokhfeld, D.A., Sadakov, O.S., Shvetsov, A.G.
L11/6 The Influence of Geometric Nonlinearity on Behaviours of Metal and Reinforced Concrete Plates
Zhilian, F., Dong, S.
L11/7 Numerical Implementation of Simplified Methods of Inelastic Analysis of Structures Subjected to Short Period Loads
Spiliopoulos, K.V.

L12: Damage and Failure Behaviour Under Pure Creep Conditions (1)

L12/1 An Analysis of Creep Damage by Finite Element Method
Wang, Z., Qiao, Y., Wu, D.
L12/2 Gradual Failure of Structures in Creep Conditions
Chrzanowski, M., Latus, P.
L12/3 Creep Behaviour of Thin Walled Composites Tubes
Thiebaud, F., Muzic, B., Lebras, J., Perreux, D., Varchon, D., Oytana, C.
L12/4 Life Prediction of Welded Tubes Undergoing Internal Pressure
Sluzalec, A., Kysiak, A.

L13: Damage and Failure Behaviour Under Pure Creep Conditions (2)

L13/1 The Influence of Long Term Ageing At 550°C on the Short and Long Term Mechanical Properties of Modified 9 Cr 1 Mo Steel
Vanderschaeghe, A.
L13/2 Creep and Long Term Strength of High Temperature Resistant Steel with Different Structure Taking into Account the type of Stress Deviator
Giginyak, F.F., Mozharovskaya, T.N., Dragunov, Yu.G., Titov, V.F.


Return to SMiRT 12 TOC