| G01 |
Out-Of-Plane
Biaxial Loading Effects on Shallow-Flaw Fracture Toughness of RPV Steels
McAfee, W.J., Bass, B.R., Bryson, J.W, Pennell, W.E. |
| G02 |
Fracture
Toughness Evaluation of Stainless Steel Weld Fusion Lines
Rosenfield, A., Held, P., Wilkowski, G. |
| G03 |
Estimation
of Mechanical Properties of Cast Stainless Steels During Thermal Aging in
LWR Systems
Chopra, O.K. |
| G04 |
Influence
of Material Characteristics on Crack Initiation Assessment of Austenitic
Piping
Kussmaul, K., Diem, H.K., Blind, D., Eisele, U., Stadtmuller, W., Widera,
M. |
| G05 |
Calculated
and Experimental Estimation of Preliminary Loading Effect at Elevated Temperatures
on Fracture Toughness of Pressure Vessel Materials
Smirnov, V.I., Timofeev, B.T. |
| G06 |
Fracture
Behavior of Shallow Cracks in Full-Thickness Clad Beams from an RPV Wall
Section
Keeney, J.A., Bass, B.R., McAfee, W.J. |
| G07 |
Research
of Stainless Steel Cladding on Crack Initiation
Rajamaki, P., Nurkkala, P., Rantala, J., Timofeev, B., Anikovsky, V. |
| G08 |
Toughness
of the Austenitic Cladding and Its Influence on the Safety of a Reactor
Pressure Vessel
Schmitt, W., Hodulak, L., Sun, D.-Z. |
| G09 |
Calculated
and Experimental Determination of Permissible Defect Sizes in Metal of Repair
Welding
Petrov, V.A., Timofeev, B.T., Ulin, V.P. |
| G010 |
Simplified
Evaluation of J Integral in Cylinders Under Thermal Loading
Barthelet, B., Coustillas, F., Pollez, P. |
| G011 |
Evaluation
of Ductile Tearing In A Cracked Component With A Simple Method (Js)
Moulin, D., Drubay, B., Clement, G., Nedelec, M. |
| G012 |
On
the Simulation of Ductile Crack Growth in Fracture Mechanics Specimens Using
the Gurson Model
Klingbeil, D., Moussavi Zadeh, G. |
| G013 |
Acceptance
Criteria for Cracks in Control Rod Drive Penetration at Reactor Vessel Head
Bros, J., Cueto-Felgueroso, C., Bosch, C. |
| G014 |
Microstructural
Conditioning for Fatigue Crack Initiation in Pressure Vessel and Piping
Materials
Fukuoka, C., Nakamura, N., Nakagawa, Y.G. |
| G015 |
Limit
Loads: Influence of Hoop Pressure Terms in the Case of a Circumferentially
Cracked Pipe Under Combined Bending and Pressure
Desquines, J., Poette, C., Lejeail, F., Martelet, B. |
| G016 |
Analysis
of the Effects of Yield Stress and Strain Hardening on the J Value of a
Crack in a Cast Elbow
Migné, C., Taupin, Ph. |
| G017 |
3D
Computation of Cracked Elbows
Ignaccolo, S., Bossennec, H.C., Faidy, C., Martelet, B. |
| G018 |
3D
Nonlinear Finite Element Analysis of Elbows with Surface Cracks
Maeda, 0., Salah, F:, Fukuda,F:, Ohno,K., Dozaki, K. |
| G019 |
Fracture
Analysis of Through-Wall Longitudinal Cracks in Thin Walled Tubes Krishnan
Krishnan, S., Bhasin, V., Kushwaha, H.S., Mahajan, S.C. |
| G020 |
The
Shape Influence on the Behaviour of Surface Cracks
Chawla, D.S., Bhate, S.R.., Kushwaha, H.S., Mahajan, S.C. |
| G021 |
Elastic-Plastic
Analysis of a Three-Dimensional Defect in a Tube Subjected to Imposed Cyclic
Bending
Chapuliot, S., Goudet, G., Autrusson, B. |
| G022 |
An
Automated Inverse Analysis System Using Neural Networks and Computational
Mechanics With Its Application To Identification of 3-D Crack Shape Hidden
in Solid
Yoshimura, S., Saito, F., Yagawa, G. |
| G023 |
Expert
System Approach For Nuclear Piping Integrity
Kim, Y.J, Seok, C.S., Jeon, H.K., Choi, Y.H., Lee, J.B. |
| G024 |
The
Application of Boundary Element Method to Mixed Mode Fracture Process Using
Strain Energy Density Criterion
Chen, K.T., Ting, K., Yang, W.S. |
| G025 |
New
Approach for Fracture Assessment of Graphite
Ishihara, M., Iyoku, T., Shiozawa, S. |
| G026 |
Crack
Instability Analysis Methods of Piping Systems for LBB Applications
Mattar Neto, M., Maneschy, E., Nóbrega, P.G.B. |
| G027 |
LBB
Assessment for Steam Generator Tube Having An Initial Flaw
Wakai, T., Watashi, K. |
| G028 |
Leak
Before Break Analysis of the Primary Loop Pipings of Belgian Nuclear Power
Plants
Gerard, R., Taupin, Ph. |
| G029 |
Additional
Requirements for the Application of the Leak Before Break Concept in Belgium
Lafaille, J.P., Roussel, G. |
| G030 |
The
Analysis of Normative Requirements to Materials of VVER Components, Basing
on LBB Concepts
Anikovsky, V.V., Karzov, G.P., Timofeev, B.T. |
| G031 |
PTS
- Current Practice in Switzerland
Marugg, C., Fierz, H., Prantl, G., Koerner, W. |
| G032 |
A
Disscussion About P-T Limit Curves and PTS Evaluation
Cruz, J.R.B., Mattar Neto, M., Andrade, A.H.P. |
| G033 |
Numerical
Simulation of Crack Behaviour Under PTS Based On Experimental Observation
Mukhopadhyay, N. K., Dutta, B.K., Kushwaha, H.S., Mahajan, S.C., Kakodkar,
A. |
| G034 |
Effects
of Material and Loading Variables on Fatigue Life of Carbon and Low-Alloy
Steels in LWR Environments
Chopra, O.K., Shack, W.J. |
| G035 |
Fatigue
Life Estimation by an Indentation Method for Irradiated Materials
Nunomura, S., Yokoi, T., Oka, T. |
| G036 |
Model
of Surface Crack Growth by Variable Offset Curve
De Iorio, A., Santoro, E. |
| G037 |
A
Simple Approach to Fatigue Analysis in Nuclear Class 1 Components
Mattar Neto, M., Maneschy, E. |
| G038 |
Comparison
of Fatigue Analysis Methods Concerning Conservativity
Binder, F., Huttner; Ch., Kroiss, G. |
| G039 |
Mechanical Test Study for
Shrinking Hoop-Pressure Shell Under Composite Fatigue and Made-Cracking
Qu, J., Yao, W., He, Y, Zhang, K., Ren, X., Wang, X., Sun, W.
|
| G040 |
Deformation
and Fracture Mechanisms of Heat-Resistant Steels Due to Their Thermal Aging
Under Cyclic Loading in Condition of Complex Stress State
Lebedev, A., Giginyak, F.F., Timofeev, B.T., Titov, V. |
| G41 |
Creep
Lifetime Assessments of Ferritic Pipeline Welds
Ainsworth, R.A., Goodall, I.W, Millel, D.A. |
| G42 |
Flaw
Assessment Methodology for FBR Components
Shimakawa, T., Miura, N., Fujioka, T., Kashima, K., Nitta, A. |
| G43 |
Short
Fatigue Cracks Growth and Closure Behavior in an Austenitic Stainless Steel
at 600°C And 650°C
Polvora, J.P., Laiarinandrasana, L., Drubay, B., Piques, R., Martelet,
B. |
| G44 |
Crack
Initiation in Transportation Cask Subjected to Impact Loads. Experimentations
and Calculations
Yuritzinn, T., Moulin, D., Sert, G. |
| G45 |
Crack
Arrest Prediction in Reactor Pressure Vessel Under PTS
Chawla, D.S., Bhate, S.R., Kushwaha, H.S., Mahajan, S.C., Kakodkar, A.
|
| G46 |
Qualification
of Eddy Current Techniques and Personnel for Inspection of Steam Generator
Tubes
Behravesh, M., Henry, G., Harris, D. |
| G47 |
Recent
Advances in Application of Intelligent Decision Support Software Systems
for Inspection Planning in Power Plants
Jovanovic, A.S., Auerkari, P., McNiven, U. |
| G48 |
RSE-M
Code Progress in the Field of Examination Evaluation and Flaw Acceptance
Criteria
Barthelet, B., Le Delliou, P., Heliot, J., Faidy, C., Drubay, B. |
