| L01/1 |
Experimental necessities of
the micro-macro methods: the example of zirconium and alloys
T. Bretheau, A. Zaoui, J. Crepin and R. Masson
|
| L01/2 |
Modelling
of strain rate-strain history coupling effect
T. Hasebe and Y. Imaida |
| L01/3 |
Micromechanical
modelling of creep of zirconium alloys
R. Masson, P. Navidi and Z. Zaoui |
| L01/4 |
Thermomechanical
behavior and modeling of Zircaloy cladding tubes from an unirradiated state
to high burn-up
I. Schaffler-Le Pichon, P. Geyer, P. Bouffioux and P. Delobelle |
| L01/6 |
Plastic
flow in metal matrix composites reinforced with particles. Analyzed by FEM
V.F. Poterasu, O. Ciobanu and M. Mares |
| L02/1 |
3D experimental
and numerical investigations to test constitutive equations for nonproportional
cyclic plasticity
S. Calloch and D. Marquis |
| L02/2 |
Experimental study of the cyclic
behaviour of a stainless steel under complex multiaxial loadings in tension-torsion-internal
and external pressure
L. BOcher and P. Delobelle
|
| L02/3 |
Inelastic
behavior of Mod. 9Cr-1Mo steel and its description by constitutive model
considering dynamic strain aging
M. Yaguchi and Y. Takahashi |
| L02/4 |
Application of Chaboche viscoplastic
theory for predicting the cyclic behaviour of modified 9Cr-1Mo
P. Chellapandi, R. Ramesh, S.C. chetal and S.B. Bhoje
|
| L03/1 |
Mechanical
evaluation of a natural UF6 transport cylinder vessel at high temperature
K. Shirai, M. Wataru, E. Pinton and B. Duret |
| L03/2 |
Determination of stresses in
500MWe PHWR sealdisc during refuelling operation
D.S. Chawla, M.A. Khan, J.J. Charan and H.S. Kushwaha
|
| L03/3 |
Recovery of the initial elastic-plastic
properties through demagnetisation-like stress paths
A. Tourabi, P. Guelin, D. Favier, B. Wack and W.K. Nowacki
|
| L03/4 |
Radiation
response of nickel-alloyed reactor pressure vessel steel
Yu A. Nikolaev and A.V. Nikolaeva |
| L04/1 |
Nanoscopic evaluation of localized
corrosion damages in an austenitic stainless steel
K. Komai and K. Minoshima
|
| L04/2 |
On local
damage development in cold-forging tools
T.O. Pedersen |
| L04/4 |
Use
of damage model and method by correlation of digital pictures for the necking
detection
S. Mguil-Touchal, F. Morestin and M. Brunet |
| L05/1 |
Creep
damage and creep crack initiation under mode II loading in 316L steel. Experimental
data and modeling
D. Poquillon, M.T. Cabrillat and A. Pineau |
| L05/2 |
Damage
and rupture of hydrided zircaloy-4 sheets
M. Grange, J. Besson, R. Molins, E. Andrieu and J. Diz |
| L05/5 |
Effects of hold-time and neutron-irradiation
on the low-cycle fatigue behaviour of type 316-CL and their consideration
in a damage model
J. Aktaa, M.G. Horsten and R. Schmitt
|
| L05/6 |
Mitigation of mercury contamination
at retired nuclear facilities
R. Kohli and J. Hanulik
|
| L06/1 |
Effect of fuel element motion
on pressure tube fretting-wear of Candu reactors
F.M. Guerout and D.A. Grandison
|
| L06/2 |
Fretting-wear of zirconium alloys
N.J. Fisher, M.K. Weckwerth, D.A.E. Grandison
|
| L06/3 |
Mechanical properties of 316L(N)
stainless steel for intermediate strain rates at 20° and 550°
C
C. Sainte Catherine, T. Yuritzinn, A. Sirvent, Y. Cariou and B.
Martelet
|
| LW/1 |
Current state of the art in constitutive
modeling for ratcheting
N. Ohno
|
| LW/2 |
Inelastic analysis of new thermal
ratchetting due to moving temperature front - Results of benchmark project
(A) by JSMS
T. Igari, M. Kobayashi, S. Imatani, Y. Takahashi, K. Take and T.
Inoue
|
| LW/3 |
Inelastic analysis of new thermal
ratchetting of 316FR at varying temperature- Results of benchmark project
(B) by JSMS
F. Yoshida, M. Kobayashi, K. Tsukimori, T. Uno, Y. Fukuda, T. Igari
and T. Inoue
|
| LW/4 |
Benchmark on a thermal ratchetting
test. Comparison of different constitutive models
M.T. Cabrillat, P. Geyer, P. Robinet, C. Migne, P. Matheron, T.
Yuritzinn and S. Taheri
|
| LW/5 |
Strain hardening of 316FR steel
in strain-controlled ratchetting deformation
N. Ohno, M.A. Karim, M. Kobayashi and T. Igari
|
| LW/6 |
A constitutive law using a ratchetting
stress for description of progressive deformation and comparison with
a polycrystalline model
C. Vogel, E. Lorentz, P. Pilvin and S. Taheri
|
| LW/7 |
Interaction creep-ratcheting.
Experimental and numerical study
O. Philip, L. Taleb, M. Cousin and N. Waeckel
|
| LW/8 |
Cyclic indentation and ratchetting
P. Paszynski, E. Ghorbel and D. Marquis
|
| LW/9 |
Cyclic plasticity investigations
including ratchetting and hardening under nonproportional loadings - Experiments
and modeling
L. Portier, S. Calloch, P. Geyer and D. Marquis
|
| LW/10 |
Modelling of uniaxial and multiaxial
ratchetting of stainless steel 316 SPH by a micromechanical approach
P. Pilvin and P. Geyer
|
