16th International
Conference on
Structural Mechanics
in Reactor Technology
|
16th International
Conference on |
|
DIVISION F: DESIGN METHODS AND RULES FOR COMPONENTS
Constitutive Modeling of Materials I
| 1224 | Size
Effects in Deformation and Fracture of a Ferritic Reactor Pressure Vessel
Steel Malmberg, Thilo; Krompholz, Klaus; Kalkhof, Dietmar; Solomos, George; Aifantis, Elias C. |
| 1891 | Investigations
to Size Effects on Plastic Deformation and Failure Behavior of Inhomogeneously
Loaded Structure Aktaa, Jarir; Hadrich, Hans-Jurgen; Julisch, Peter; Klotz, Marco; Schmitt, Rolf |
| 1982 | Constitutive
Models with Formative Hardening and Non-linear Kinematic Hardening Rules
for Simulation of Ratcheting Bari, Shafiqul; Funaki, Naoki; Hassan, Tasnim |
| 2054 | Experiments
and Simulation of Transformation Induced Plasticity under Multiaxial Loading
for a 16MnD5 Ferritic Steel Coret, Michel; Combescure, Alain |
Constitutive Modeling of Materials II
| 1220 | Gradient
Plasticity Approach To Size Effects Malmberg, Thilo; Tsagrakis, Ioannis; Eleftheriadis, Iordanis; Aifantis, Elias C.; Krompholz, Klaus; Solomos, George |
| 1356 | Strain
Rate Effects of Nuclear Steels in Room and Higher Temperatures Solomos, George; Albertini, Carlo; Labibes, Kamel; Pizzinato, Valerio; Viaccoz, Bernard |
| 1824 | Small Offset-Strain
Yield Limits Obtained by Biaxial Tensile Tests and Analysis Using a New
Anisotropic Formulation of Polynomial Criteria Losilla, Gines; Tourabi, Ali |
| 1967 | A Lower
Bound Failure Criterion in Superplasticity of the Zr-2.5%Nb Alloy CANDU
Pressure Tubes Radu, Vasile S. |
Creep
| 1299 | Master
Curve da/dt vs C* for Creep and Creep-Fatigue Crack Growth on CT Specimens Laiarinandrasana, Lucien; Piques, Roland; Kabiri, Rachid; Drubay, Bernard |
| 1351 | Tertiary
Creep Stage in a Non Linear Kinematics and Isotropic Hardening Elasto-visco-plastic
Model Michel, Bruno; Assire, Aimery; Cambefort, Pierre |
| 1546 | Effect
of Microstructural Alteration on the Creep Behaviour and Effect of Flaws
in 50Mo50Ni-Nb Engineering Alloy Belloni, Giulio; Caironi, Giovanni; Gariboldi, E.; Lo Conte, Antonietta |
| 1781 | Ultimate
Failure of Creeping Structures as a Result of Progressive Damage Bodnar, Adam; Chrzanowski, Marcin; Latus, Pawel; Nowak, Krzysztof |
| 2042 | The Development of Validation Methodology
and its Further Application to Multi-axial Creep Damage Constitutive Equations
for 0.5Cr0.5Mo0.25V Ferritic Steel at 590°C Xu, Qiang |
Creep Fatigue
Strength and Fracture of Concrete
| 1203 |
Effect of Axial Restrained
Force on Behavior and Average Crack Spacing of Reinforced Concrete Flexural
Member |
| 1230 | Strength
and Fracture Toughness of Heavy Concrete with Various Iron Aggregate Inclusions Kan, Yu-Cheng; Pei, Kuang-Chih; Chang, Chein-Lung |
| 1477 | Failure
Mechanisms for Large-sized Grouted Anchor Bolt under Tensile Load Lee, Nam Ho; Moon, Il Hwan; In Soo, Ju |
| 1743 |
Influence Of Strength
On The Fracture Energy Of HPC |
Design of Piping, Vessels, and Components I
| 1018 |
Simulation of a Single
Motor of Latch Type Control Element Drive Mechanism for Korean Next Generation
Reactor |
| 1173 | Innovative
Technologies in the Structural Design of FBRs Asayama, Tai; Tsukimori, Kazuyuki; Morishita, Masaki |
| 1603 | Optimum
Geometry for Pressure Vessel Attachments Bjorkman, Gordon S.; Richards, Rowland Jr. |
| 1731 |
Characteristics of
Packings for Stuffing Boxes for the Proof of Strength, Function and Tightness
of Valves |
Design of Piping Vessels, and Components II
| 1218 |
Simplified Method of
Mechanical Analysis of Safety Class I Piping |
| 1426 | Improvement
of Structural Integrity Assessment Guideline for Fast Reactor Components-
Part I : Evaluation of Defect-Free Structures Takahashi, Yukio; Ohno, Nobutada; Yagawa, Genki |
| 1732 |
Flanged Joints - Functional
Proof or Monitoring of Emissions |
Design of Piping Vessels, and Components III
| 1431 |
An Analytical Study
on the Effects of End Conditions on the Behavior of 45- and 90-Degree
Elbows Subjected to Bending |
| 1984 | A Margin-Consistent
Procedure for Calculating the B2 Stress Index and a Proposed New Design
Equation Tan, Ying; Matzen, Vernon C.; Yuan, Xi |
| 2066 | Revised
C2 Stress Index for 90-degree Piping Elbows Gurdal, Robert; Yu, Lixin |