16th International
Conference on
Structural Mechanics
in Reactor Technology
|
16th International
Conference on |
|
DIVISION G: FRACTURE MECHANICS
Pressurized Thermal Shock
| 1177 |
Post Test Analyses
of the NESC II Experiments on Cladded Cylinders with Circumferential Cracks
Subjected to a Pressurized Thermal Shock |
| 1495 | Analyses
of Fracture Toughness Tests and Application to NESC II Thermal Shock Experiments Siegele, Dieter; Schaefer, Roland; Varfolomeyev, Igor; Blauel, Johann Georg |
| 1765 | Round Robin Analysis of Pressurized
Thermal Shock for Reactor Vessel Jhung, Myung Jo; Kim, S. H.; Lee, Jin Ho; Park, Youn-Won |
| 1867 | Development
of Th Scenario Screening Criteria for Pressurized Thermal Shock Analysis Li, Fei; Modarres, Mohammad |
| 2069 |
How Safe are Nuclear
Pressure Vessels in 2001? |
Welds I: Weld Analysis
| 1275 |
Reduction of Residual
Stress of Welded Joint Using Vibrational Load |
| 1566 | Mapping
of Characteristic Features of Bimetallic Welds from the Standpoint of Engineering
Critical Analysis Laukkanen, Anssi; Nevasmaa, Pekka; Ehrnsten, Ulla; Rintamaa, Rauno |
| 1614 | Evaluation
of the Crack Behaviour in a Bimetallic Weld Bhandari, Surender K.; Mottet, Gérard; Robin, Vincent |
| 1941 | Treatment
of Residual Stresses in Welds in Structural Integrity Assessments Buckthorpe, Derek Edward; Bestwick, Roger |
| 1943 | Materials
for the High Temperature Reactor (HTR) Buckthorpe, Derek Edward; Couturier, Raphael; van der Schaaf, B.; Riou, B.; Rantala, H.; Moormann, Rainer; Alonso, C.; Friedrich, B-C. |
| 1983 |
Residual Stresses
in Butt and Shocket Welded Joints |
Welds II: Evaluation of Material Properties
| 1302 |
Mechanical Cyclic Behavior
of 316L Pipe Weldment for Fatigue Analysis |
| 1327 | Assessment
of the Significance of Defects in Tubular Joints Hodulak, Ludvik; Kordisch, Horst; Varfolomeyev, Igor; Beukelmann, Dieter |
| 1398 | Fracture
Of Weld Including Mismatch Effect Hornet, Patrick |
| 1728 | The 3D
Surface Crack-front Constraints in Welded Joints Lee, Hyungyil |
| 1773 | Residual
Stresses, Notch Stresses, and Stress Intensites at Welds: An Unified Assessment
Procedure with Self-Consistency P. Dong, J.; Hong, J.K. |
| 1820 | Influence
of Welding Planar Defects in the Fracture Toughnessof Structural Steel.
Preliminary Testings Martins, Geraldo de Paula; Cimini Jr., Carlos Alberto; Godefroid, Leonardo Barbosa |
| 1969 |
On the Effects of Wet
Underwater Welding on the Fracture Behaviour of Welds |
Fatigue I: Assessment and Damage Accumulation
| 1598 |
Evaluation of Non Conservatism
of Combined Rainflow Counting and Miner 's Rule for Damage Cumulation
In Strain Controlled Fatigue |
| 1693 | Crack Closure
Behavior Under Elastic-plastic Cyclic Loading and its Effect on Faigue J-integral
Range Takahashi, Yukio |
| 1735 | Failure
Assessment Diagrams for High Temperature Defect Assessment under Variable
Loading Conditions Hooton, D.G.; Ainsworth, R.A. |
| 1777 | Analysis
of Stress Intensity Factor of Piping using Large Scale Analysis Code ADVentureCluster Suzuki, Masabumi; Akiba, Hiroshi; Yoshimura, Shinobu; Yagawa, Genki |
| 1861 | Material
Degradation and Fracture in Zirconium Alloys Massih, Ali R.; Varias, Andrew G. |
| 1991 |
Fatigue Monitoring
by Computer Aided Visualization of Transients and Calculation of Fatigue
Usage by Algorithm |
Fatigue II: Mixed Mode Analysis
| 1126 |
Fatigue Test Under
Mode II+III Mixed-Mode Condition |
| 1127 | Fatigue
Crack Growth Simulation under Mode I+II Mixed Mode Condition Kikuchi, Masanori |
| 1163 | Does Mode
IFatigue Tests Alone Warrant Reliability? Nunomura, Shigetomo; Ymazaki, Yasuhiro; Ootaki, Hideharu; Nozawa, Takehisa |
| 1841 |
Mixed Mode Crack Initiation
and Direction in Circumferentially Cracked Pipes |
Leak Before Break (LBB) Assessment
| 1311 |
High Cycle Thermal
Fatigue: Experience and State of the Art in French LMFRs |
| 1582 | Leak Rate
Evaluation For Through-Wall Cracks Liu, Bo; Shi, Chongmiao; Gu, Fangyu; Bhandari, Surender K. |
| 1585 | Crack Opening
Behavior of Penetrated Crack under Cyclic or Monotonic Loading Yoo, Yeon Sik; Ahn, Seok Hwan; Nam, Ki Woo; Ando, Kotoji |
| 1625 | Applicability
of LBB (Leak-Before-Break) Design for Main Steam Line in Korea Nuclear Power
Plant Chung, Dae-Youl; Lim, Hyuk-Soon |
| 1758 | Overview
of the Battelle Integrity of Nuclear Piping (BINP) Program Scott, Paul; Olson, Richard J.; Wilkowski, Gery M.; Miura, Naoki; Choi, Young-Hwan; Chang, Tsun-Yung; Chokshi, Nilesh |
| 1769 | High Temperature
Leak Before Break Assessments Yellowlees, Stuart Francis; Hooton, Dennis George; Sharples, John Kenneth; Budden, Peter J. |
| 2014 |
Effects of Pipe-System
Restraint on COD Calculations of Axial Loaded Pipes for LBB Applications
- Finite Element Round Robin Results |
Fracture Assessment I
Fracture Assessment II
Stress Corrosion Cracking and Micromechanics
| 1095 |
Effect of Microstructure
on Stress Corrosion Cracking of Alloy 600 and Alloy 690 in Caustic Solution |
| 1483 | Precipitation
Morphologies of Grain Boundary Chromium Carbides in Alloy 690TT Lim, Yun Soo; Han, Jung Ho; Cho, Hai Dong; Kim, Joung Soo |
| 1858 | Early Development
of Stress Corrosion Cracks at the Grain Scale: Incomplete Random Tessellation
Model Cizelj, Leon; Kovac, Marko |
| 1882 | A Probabilistic
Model for the Stress Corrosion Fracture of Glass Auradou, Harold; Vandembroucq, Damien; Guillot, Claude; Bouchaud, Elisabeth |
| 1920 | Applicability
of Advanced Design Method of Graphite Components by Microstructure-Based
Brittle Fracture Model Ishihara, Masahiro; Takahashi, Tsuneo; Hanawa, Satoshi |
| 2009 | Mechanical
Properties and Microstructural Development in Irradiated 316 Stainless Steel Allen, Todd R.; Cole, J.I.; Tsai, H.; Yoshitake, T.; Donomae, T.; Akasaka, N. |