18th
International Conference on
Structural Mechanics
in Reactor Technology
| 18th
International Conference on |
|
DIVISION G: FRACTURE MECHANICS
General Integrity Issues
| G01-2 | The
NRC Perspective on Flaw Evaluations for Various Nuclear Components Simon C. F. Sheng, John Honcharik, Matthew A. Mitchell, Terence L. Chan |
| G01-4 | Classification
of the Mastercurve Concept within the Framework of Safety Assessments Based on
Mechanics of Materials Eberhard Roos, Xaver Schuler, Horst Silcher, Hans-Peter Seebich, Ulrich Eisele |
| G01-5 | Use
of the Master Curve Methodology for Real Three Dimensional Cracks Kim Wallin, Rauno Rintamaa |
Thermal and Dynamic Loading
| G02-2 | Stress
Intensity Factors Evaluation due to Thermal Stresses Using Photoelasticity Marco Antônio Dutra Quinan, Miguel Mattar Neto |
| G02-3 | 3-D
Thermal Weight Function Method and Multiple Virtual Crack Extension Technique
for Thermal Shock Problems Yanlin Lu, Xiao Zhou, Jiadi Qu, Yikang Dou, Yinbiao He |
| G02-4 | Dynamic
Crack Growth and Arrest Analysis Using Cohesive Zones Gilles Debruyne, Miguel Charlotte |
| G02-5 | Double
Cracking in Brittle Cylindrical Specimens Subjected to Quenching Weijing He, Haiyan Li, Siu-Lun Fok, J. Derek Jackson, Jan R. Wright |
| G02-7 | Statistical
Analysis of Creep Crack Growth Data in Type 316LN Stainless Steel Woo-Seog Ryu, Woo-Gon Kim, Song-Nam Yoon |
Fundamental Research I: Theoretical Research
| G03-1 | Comparison
of Stress Intensity Factor Solutions for Cylinders with Axial and Circumferential
Cracks Naoki Miura, Yukio Takahashi, Hiroshi Shibamoto, Kazuhiko Inoue |
| G03-2 | A
Generic Validation Methodology and its Application to a Set of Multi-Axial Creep
Damage Constitutive Equations Qiang Xu |
| G03-3 | Simulating
Hydride Embrittlement on Cold-Worked Stress-Relieved Zircaloy-4 with Gurson-Tvergaard-Needleman
Damage Model Jean Desquines, Vincent Busser, Frédéric Perales |
| G03-4 | Applicability
of Computational Cell Model Technique for Nonlinear Fracture Mechanics Weilin Zang, Pål Efsing |
Fundamental Research II: Theoretical Research
| G04-1 | On
the Constraint-Based Failure Assessment of Thick-Walled Cylinders with Internal
Axial Cracks Xin Wang, Wolf Reinhardt |
| G04-2 | The
Leak-Before-Break (LBB) Safety Analysis Research Haihua Wu, Quan Duan |
| G04-3 | Stress
Distribution in a Cubic Solid Containing a Penny-Shaped Crack Marc Dahan |
| G04-6 | Comparative
Studies on Constitutive Models for Cohesive Interface Cracks of Quasi-Brittle
Materials Xinpu Shen, Guoxiao Shen, Lin Zhou |
Fundamental Research III: Numerical Methods
| G05-1 | Comparing
FEM, BEM and Analytical Formulations in the Evaluation of the Stress Intensity
Factor in LEFM Ricardo Fiuza Lima, Sandro Petry Laureano Leme, Luciano Mendes Bezerra, Paul William Partridge |
| G05-2 | New
Stress Intensity Factor Solutions for an Elliptical Crack in a Plate Patrick LE Delliou, Bruno Barthelet |
| G05-4 | Application
of Three Dimensional Crack Analysis Using Finite Element Alternating Method Tae Soon Kim, Sang Yun Park, Jai Hak Park, Chi Yong Park, Tae Eun Jin |
| G05-5 | Finite
Element Simulation of Crack Growth in Blanking Process Using Floating Collapsed
Elements Farid R. Biglari, Mehrdad Ghatrenabi, Mohamad R. Razfar, Kamran M. Nikbin |
| G05-7 | Stacking
Sequence Optimization of Laminated Panels for Maximum Strength Using Genetic Algorithm Mahmood Shakeri, Akbar Alibeiglou, Abedin Morowat |
| G05-8 | Elastic-Plastic
Behaviour of a Nuclear Pipe Elbow with Axial Through Wall Crack at Crown under
In-Plane Bending K.M. Prabhakaran, V. Venkat Raj |
Analysis of Welded Structures
| G06-1 | Structural
Integrity of Dissimilar Welds BIMET-DIMEW Project Results Claude Faidy, G. Martin |
| G06-4 | Fad-Based
Defect Assessment Method for Welded Structures at High Temperature Fuzhen Xuan, Shantung Tu, Zhengdong Wang |
| G06-6 | Fatigue
Crack Propagation Properties on Corrosion Resistant Welded Joints Geraldo de Paula Martins, Carlos Alberto Cimini, Jr., Leonardo Barbosa Godefroid, Emerson Giovane Rabello |
Reactor Pressure Vessel Integrity
| G07-1 | SMILE:
A European R&D Program for the Inclusion of Warm Pre-Stress in RPV Assessment Dominique Moinereau, Georges Bezdikian |
| G07-2 | SMILE:
Interpretation of WP4 PTS Transient Type Experiment Performed on a Cracked Cylinder
Involving Warm Pre-Stress Dominique Moinereau, Anna Dahl, Yves Wadier |
| G07-3 | SMILE:
Experimental Results of the WP4 PTS Large Scale Test Performed on a Component
in Terms of Cracked Cylinder Involving Warm Pre-Stress Klaus Kerkhof, Georges Bezdikian, Dominique Moinereau, Anna Dahl, Yves Wadier, Philippe Gilles, Elisabeth Keim, Stéphane Chapuliot, Nigel Taylor, David Lidbury, John Sharples, Peter Budden, Dieter Siegele, Gerhard Nagel, Richard Bass, David Emond |
| G07-4 | Constraint-Based
Fracture Assessment of Embedded-Flaw Beams in the NESC-IV Tests Iradj Sattari-Far |
Pipe and Tube Integrity I: General Issues
| G08-1 | Evaluation
of Full Scale Pipe Tests Based on a Probabilistic Procedure Eberhard Roos, Karl-Heinz Herter, Michael Ringel |
| G08-3 | Load
Bearing Capacity of Degraded Nuclear Piping Eberhard Roos, Karl-Heinz Herter, Xaver Schuler, J. Chattopadhyay, B.K. Dutta, H.S. Kushwaha |
| G08-4 | Coalescence
Model of Two Collinear Cracks Existing in Steam Generator Tubes Seong In Moon, Yoon Suk Chang, Young Jin Kim, Youn Won Park, Myung Ho Song, Young Hwan Choi, Jin Ho Lee |
| G08-5 | Influence
of a Welded Pipe Whip Restraint on the Critical Crack Size in a 90° Bend Igor Varfolomeyev, Wieland Holzer, Dieter Beukelmann, Wolfgang Mayinger |
Pipe and Tube Integrity II: Corrosion-Fatigue Crack Analysis
| G09-1 | Fatigue
Crack Growth Properties of Typical Pressure Vessel Steels at High Temperature Zengliang Gao, Weiming Sun, Ying Wang, Fang Zhang |
| G09-2 | Three
Dimensional Fatigue Propagation Modelling of a Nozzle Corner Crack Philippe Gilles, Johan Leseux, Moïse Pignol |
| G09-3 | Corrosion-Fatigue
Crack Growth Behavior of Piping and Reactor Pressure Vessel Steels Evgeniy A. Grin, Alexander V. Zelenskiy |
| G09-6 | The
Analysis of the Dissimilar Metal Weld Joint for Fracture Mechanics Evaluations June-Soo Park, Ha-cheol Song, Ki-seok Yoon, Taek-sang Choi |
Pipe and Tube Integrity III: Damage and Failure Assessment
| G10-1 | Estimation
Schemes to Evaluate Elastic-Plastic J and COD for Throughwall Circumferentially
Cracked Elbow under Closing Moment J. Chattopadhyay, A.K.S. Tomar, B.K. Dutta, H.S. Kushwaha |
| G10-3 | DHC
Behaviour of Irradiated Zr-2.5Nb Pressure Tubes Up to 365°C M. Resta Levi, M.P. Puls |
| G10-4 | Prediction
of Failure due to Crack Coalescence in Steam Generator Tubes Abdalla Elbella, Jeries Abou Hanna, Suman Kumar Renukunta |
| G10-5 | Limit
Load Analysis for Local Wall-Thinning Steam Generator Tubes Hu Hui, Peining Li, Yi Tang, Yong Nie |
Material Properties