B02/1 |
Micropolar Peridynamic Constitutive Model for Concrete
W. Gerstle, N. Sau, E. Aguilera |
B02/2 |
Crack Induced Stress and Deformation Field
A.K. Sahoo, R.N. Dubey, M.D. Pandey |
B02/3 |
Static and Dynamic Analysis of a Concrete Shear-Wall
J. Park, C.-H. Chung, C.-H. Hyun, Y.-L. Paek, K.-R. Choi |
B02/4 |
Simulation of the Prestress in a Representative Structural Volume of a French 1450 Mwe Containment Building
L. Jason, S. Ghavamian, A. Courtois, L. Illie |
B02/5 |
Free Vibration of Rectangular Composite Plates with Localized Patch Mass
A. Alibiglu, M. Shakeri, M. Kari |
| |
|
B03: Stress Analysis of Nuclear Reactor Components - II |
|
|
| B03/1 |
Evaluating Displacements on a Circular Cylindrical Shell with the Use of Polynomial Quadrature Method
E. de Souza, L.J. Pedroso |
| B03/2 |
Limit Load Analysis Using the Reference Volume Concept
I.F.Z. Fanous, R. Seshadri |
| B03/3 |
Creep Bending and Buckling of Nonlinear Viscoelastic Columns with Applications to CANDU Fuel Sheaths
S.D. Yu, X. Zhang |
| B03/4 |
Design of Pressure Vessel Pads and Attachments To Minimize Global Stress Concentrations
G.S. Bjorkman |
| B03/5 |
Field Dynamic Balance Method Study for the AMB - Flexible Rotor System
L. Hongwei, X. Yang, G. Huidong, Z. Lei
|
| B03/6 |
Improved Prediction Method for Estimating Notch Elastic-Plastic Strains
R. Adibi-Asl, R. Seshadri |
| |
|
| B04: Analysis of Piping Components - I |
| |
|
| B04/1 |
Pipe vs. Shell FE Modeling of CANDU Feeder Pipes
U. Abdelsalam, D.K. Vijay |
| B04/2 |
Pressurised Shell Intersections with Local Area Wall Thinning
T. Ahmad, M.A. Khan, D. Redekop |
| B04/3 |
C2 Stress Indices for Back-to-Back Welded Pipe Bends
M. I. Haq, M. Aggarwal |
| B04/4 |
Effect of the Wall Thickness Tolerance on the Results of Detailed FEM-Calculations
W. Holzer, W. Wolf |
| B04/5 |
General Limit Load and B2 Stress Index Equation for Pipe Bends under In Plane Bending
S.K. Gupta, V.Bhasin, K.K. Vaze, A.K. Ghosh, H.S. Kushwaha |
| |
|
| B05: Analysis of Piping Components - II |
| |
|
| B05/1 |
Weld Distortion Control Methods and Applications of Weld Modeling
F.W. Brust, P.M. Scott |
| B05/2 |
Axisymmetric Axial Crushing Analysis of Thin Walled Metallic Frusta and Tubes
H. Abbas, M. Hosseini, N.K. Gupta |
| B05/3 |
Residual Stress Modeling of Pipe Bends
S. Khajehpour, M. Yetisir |
| B05/4 |
Evaluation of the Residual Stresses for Modified 9Cr-1Mo Steel Welds by a Neutron Diffraction Technique and a Numerical Simulation
S.-H. Kim, J.-B. Kim, W.-J. Lee |
| B05/5 |
Simplified Method for the Assessment of Elastic-Plastic Shakedown in Piping
W. Reinhardt |
| |
|
| B06: Modelling of Material Degradation |
| |
|
| B06/1 |
Application of Dislocation Dynamics to Assess Irradiation Effect on Materials with Different Grain Size
P.V. Durgaprasad, B.K. Dutta, H.S. Kushwaha, S. Banerjee |
| B06/2 |
Micro-indentation Test on Nuclear Fuel: Numerical Investigations
R. Masson, J.-M. Gatt, D. Baron |
| B06/3 |
Numerical Modeling of Pipelines and Power Equipment Metals Flow-Assisted Corrosion Using RAMEK
G.V. Tomarov, A.A. Shipkov, M.V. Kasimovskiy |
| B06/4 |
Gurson Damage Analysis with an Arbitrary Lagrangian-Eulerian Formulation
L.A.B. da Cunda, G.J. Creus |
| B06/5 |
Alternative Methodology For Assessing Part-Through-Wall Cracks in Carbon Steel Bends Removed from Point Lepreau Generating Station
X. Duan, M.J. Kozluk, T. Gendron, J. Slade |
| |
|
B07: Multiphysics Modelling |
| |
|
| B07/1 |
CFD Approach to Core-Concrete Interaction
L. Bolshov, V. Chudanov |
| B07/2 |
Shielding Analysis and Dose Rate Evaluation for the I & C System Development of an Instrumented Fuel Capsule
Y.-H. Kang, D.-S. Lee, C.-J. Park, B.-G. Kim, H.-R. Kim |
| B07/3 |
Thermal Hydraulics Aspects of Top Reflood Experiment PARAMETER-SF1 Modeling
A E. Kisselev, V.F. Strizhov, A.D. Vasiliev, V.I. Nalivaev, N.Y. Parshin |
| B07/4 |
Hardware Controller Implementation of CANDU Nuclear Power Plant Shutdown Systems
P. Zahedi |
| B07/5 |
Structural and Vibrational Analysis of Liquid Storage Tanks
Y. Dong, Y.D. Redekop |
| |
|
| Workshops |
