G02/1 |
Review of Studies Regarding Risk-Informing Regulations for Normal Operating Transients
T.L. Dickson, M.T. EricksonKirk |
G02/2 |
Three Dimensional Fracture Analysis of the Reactor Pressure Vessel Inlet Nozzle Under Pressurized Thermal Shock
Y.J. Corriger, J-P Izard, P.A. Gilles |
G02/3 |
Evaluation of Constraint in Semi-Large Scale Experiments Performed on Specimens with Underclad Cracks
D. Lauerova, V. Pistora, A. Kacor, M. Brumovsky |
G02/4 |
Probabilistic Evaluation in Support of Risk Informed Pressure Tube Maintenance
E. Nadeau, T. Byrne, S. Khajehpour, E. Lupia, E. Araujo |
| |
|
| Session G03: Leak-Before-Break Assessment |
| |
|
G03/1 |
The Applied Researches of the Leak Before Break (LBB) on the Marine Pressure Pipes
Z. Li, X. Lv, J. Bai, X. Liu
|
| G03/2 |
Leak Before Break Procedure for SFR Reactors and HTR Reactors - Improvements and Validation
H. Deschannels, C. Krakowiak, Y. Kayser, J.P. Simoneau, J.L. Berton |
| G03/3 |
Leak Before Break Procedure for High Temperature Reactors and Gas Fast Reactors - Crack Opening Profile Studies for Complex-Shaped Defects in Thick Components
C. Krakowiak, Y. Kayser, H. Deschanels |
| G03/4 |
Overview of the MERIT (Maximizing Enhancements in Risk Informed Technology) Program
P. Scott, B. Brust, R. Kurth, D. Rudland, G. Wilkowski |
| G03/5 |
Load History Effects on Crack Tip Characterising Parameters
P. M. Wood, D. Beardsmore, C. Watson |
| G03/6 |
The Influence of Weld Strength Mis-Match on Crack Opening Areas
R. Charles, A.P. Warren, J.K. Sharples, P. Budden |
| |
Session G04: Degradation Mechanisms - PWSCC |
| |
|
G04/1 |
Primary Water Stress Corrosion Cracking (PWSCC) in Bimetal Nuclear Pipe Welds – Analysis Considerations
B. Brust, P. Scott
|
G04/2 |
Modeling of Primary Water Stress Corrosion Cracking at Control Rod Drive Mechanism Nozzles of Pressurized Water Reactors
O.F. Aly, A.H. Paes de Andrade, M.M. Neto, M. Schvartzman
|
G04/3 |
Stress Corrosion Crack Growth: Discrepancies with Service History and Impacts on Time to Failure
G. Wilkowski, H. Xu, D. Rudland
|
G04/4 |
Mechanical Properties Evaluation in Inconel 82/182 Dissimilar Metal Welds
J. Lee, C. Jang, J.S. Kim, T.E. Jin
|
G04/5 |
Some Applications Related to the Structural Integrity Analyses of CANDU 6 Pressure Tubes
V. Radu
|
G04/6 |
Evaluation of PWSCC Growth in a PWR 2-inch Diameter Drain Line
D. Rudland, Y. Chen, G. Wilkowski
|
| |
|
G05: Degradation Mechanisms - Fatigue |
| |
|
G05/1 |
Fatigue Crack Propagation Properties in SAC 50 Steel Welded Joints
G. de Paula Martins, J.J. Villela, E.G. Rabello, C.A. Cimini Jr., L.B. Godefroid
|
G05/2 |
Corrosion Fatigue Behaviour of SAE 8620 Steel in NaCl 3.5% Solution
N.N.A. Filho, T.R. Mansur, E.G. Rabello
|
G05/3 |
Effect of the Environment on Fatigue Strength Limit of SAE 8620 Steel
N.N.A. Filho, T.R. Mansur, E.G. Rabello
|
G05/4 |
Thermal Fatigue in Horizontal Pipelines Due to Thermal Stratification Phenomenon
L.L. Silva, C.A. Cimini Jr., T.R. Mansur
|
G05/5 |
Effect of Thermal Cycles on the Fatigue Life of AISI 321 Stainless Steel
L. Junek, J. Bystrianský, L. Vlcek, B. Strnadel
|
G05/6 |
Effect of the Mixing Flows on the Propagation of Thermal Fatigue Cracks
C. Gourdin, S. Chapuliot, J-P. Magnaud, F. Mermaz, A. Monavon |
| |
|
G06: On the Use of Finite Element Analysis |
| |
|
G06/1 |
Finite Element Validation of the Method Used to Estimate the Creep Crack Tip Charactering Parameters for Combined Primary
and Secondary Stresses
Y. Lei, D. Dean
|
G06/2 |
FEM Analysis for the Mechanism of Delayed Hydride Cracking (DHC) in Zr-2.5Nb Pressure Tubes
K.S. Kim, Y.S. Kim, Y.M. Cheong |
G06/3 |
Finite Element Investigation on the Interaction Effect of Adjacent Volumetric Flaws
R.J. Ho, H. Shi, D.H.B. Mok, J.L. Goldberg |
G06/4 |
J-R Curve Prediction Using Cohesive Model and Its Sensitivity to a Material Curve
V. Kozák, I. Dlouhý
|
G06/5 |
A Study on Structural Integrity of Dissimilar Welds in Nuclear Piping
J. Sung, T-E, Jin, S-G Lee, H-S Chung |
| |
|
G07: Flaw Models - I |
| |
|
| G07/1 |
Evaluation of Dynamic Fracture Mechanics in the AISI 316 Stainless Steel Using Instrumented Charpy Impact Testing
B.J.F. Rodrigues, , J.D. de Carvalho, J.J. Vilela, G. de Paula Martins |
| G07/2 |
Characterisation of Co-Planar Surface-Breaking Flaws under Cleavage Failure Conditions
M.A. Wilkes, D.W. Beardsmore, C.T. Watson, A.H. Sherry, M. Goldthorpe
|
| G07/3 |
Evaluation of J-Integral for Surface Cracked Plates under Biaxial Loading Using Extended Reference Stress Method
N. Miura, Y. Takahashi
|
| G07/4 |
Accounting for Strain Hardening Effects in J Estimation Schemes
P. Gilles, S. Hemmet
|
|
|
G08: Flaw Models - II |
|
|
| G08/1 |
Boundary-Conditions, Temperatures, and Stress-Intensity Factors Under Arbitrary Thermal Transients Via the Inverse Route
A.E. Segall, J.Meeker |
| G08/2 |
Evaluation on Structural Integrity of an Annular Structure Having Partially Contact Surfaces
J.-K. Hwang, I.-Y. Kim |
| G08/3 |
Stress Distribution in a Tetragonal Anisotropic Medium With a Penny-Shaped Crack (I)
M. Dahan |
G08/4 |
The Limit State Of Heat Resistant Steel After Combined WPS
P.V. Yasniy, V. Hutsaylyuk, P. Pschonjak, V. Podkolzin |
|
|
Workshop WF: Introductory Workshop Session on Fracture Mechanics |
|
|
WG/1 |
UK Research Programme on Fracture Mechanics – Review of Progress
J. Sharple, C. Watson, K. Wright
|
WG/2 |
Probabilistic Structural Integrity of a PWR Pressure Vessel – PROSIR Round Robin
C. Faidy, A. Huerta |
WG/3 |
Canadian Regulatory Perspective on LBB Application for CANDU Piping
J.C. Jin, A. Blahoianu, T. Viglasky
|
WG/4 |
Comparative Analysis on Structural Integrity Assessment Using Fracture Toughness Parameters Obtained by Different Methodologies
E.P. Asta, F.A. Cambiasso, J.J. Balderrama
|
