|
10th International
Conference on |
|
DIVISION F: LWR PRESSURE COMPONENTS
(The papers with links are those received by the SMiRT 10 Secretariat at the
time the Transactions went to press)
F01: Pressurized Thermal Shock
F02: Piping-Pipe Whip, Fatigue
| Pipe
to Pipe Impact Tests Laurence Brunel, Alain Stromboni, Jean Lallement |
| Design
Rules for Piping: Experimental Validation of Flexibility and Elastic Stress
Indices for Elbows Under Bending F. Touboul, M. Ben Jdidia, D. Acker |
| Development
Work on Vibration Acceptance Criteria of Piping Systems Mileta Mikasinovic |
| Research
Needs for Fatigue Damage Assessment in PWR Surge and Spray Piping V.N. Shah, D.A. Conley |
F03: Piping - Analysis
|
System Response
of Piping Configurations Under Overload Conditions |
| The
Effect of Plastic Behavior on Damping in Piping Systems Arthur G. Ware |
| Nonlinear
Analysis of Pressure Components Under Dynamic Conditions L. Lazzeri |
| Design
Rules for Piping: Plastic Stability of Straight Parts Under Level D Loadings F. Touboul, M. Ben Jdidia, D. Acker |
F04: Environmental Effects - Plant Applications
|
Strain Rate
Dependent Environmental Cracking of Ferritic Steels in High Temperature
Water |
| Corrosion
Fatigue Crack Growth Through Cladding to Base Metal of a CrMoV Reactor Pressure
Vessel Steel T. Saario, K.R. Törrönen, R. Ahlstrand, V.A. Ignatov, V. Fedorova, V. Rybin, B.T. Timofeev |
| Pipe
Failure Tests (RORV) at HDR Facility - Experimental Results Hermann A. Hunger, Harald Diem |
| Structural
Integrity Evaluation of Microiologically Induced Corrosion Damaged Stainless
Steel Welds A.B. Poole, L.C. Rinaca, W.A. Pavinich |
F05: Design of Components - Vessels
| Thermal
Analysis for the Sealing Test on a RPV Model Jia-di Qu, Yi-kang Dou |
| Structural
Relaibility Tests of Reactor Vessels During Destructive Tests of Models Alexander A. Blmin, Yuri G. Dragunov, Igor V. Gorynin, Victor A. Ignatov, Georgii P. Karzov, Boris T. Timofeev |
| Experimental
Investigation on Cracked Body with Adhesive-Bonded Reinforcement Yi-Qiang Hu, Hong-Liang Pan, Pei-Ning Li, Ding-Yi Ju |
| Effect
of Laser Alloying on the Mechanism of Steel Fracture Under the Cyclic Loading Mikhail I. Chayevsky, Josephina M. Blednova |
| Corrosion
Fatigue Strength of VVER-440 RPV-Steel Base and Weld Metal B.T. Timofeev, V.A. Fedorova, V.V. Rybin, R. Ahlstrand, T. Saario, K.R. Törrönen |
F06: Design of Components - Thermal Analysis and Fatigue
| Temperature
and Wall Strain Fluctations During the TEMR Thermal Stratification Tests
at HDR L. Wolf, M. Geib, W. Häfner, E. Hansjosten, A. Talja |
| Overview
of Piping Requalification for Thermal Stratification Bryan C, Morgan, Gordon Hau |
| Method
to Assess Mechanical Effects of Stratification in Piping System Ph. Taupin, E. Thomas-Solgadi, C. Ensel |
| Analysis
of Pump's Shaft Torsional Vibrations in Transient Conditions Gilbert R. Pasqualini, Claude Cauquelin |
| Low
Cycle Fatigue Behaviour of Low Alloy Steels in High Temperature Pressurized
Water Norio Nagata, Shunji Sato, Yasuyuki Katada |
F07: Component Analysis - Steam Generators and Pressurizer
| Conceptual
Design and Comparison of Once-Through Tube Boiling Steam Generators for
Different Annular Bundle Configurations L. Cinotti, G. Ferrari, F. Magris |
| Once-Through
Straight Tube Steam Generators Subject to Severe Thermal Transients Compensation
Systems Optimization Francesco Alicino, Stefano Chiocchio, Fulvio Fardi, Giuseppe Zampini |
| 3D
Finite Element Stress Analysis of the Primary Side and Tube Sheet of a NPP
Steam Generator Dinggeng Xu, Weijuan Ye, Baisong Wang |
| Thermomechanical
Analysis of a Steam Generator Bottom G. Debruyne, S. Ignaccolo |
| Stresses
in Penetrating Nozzles and in Perforated Spherical Vessel Bottoms Hubert Sacher, Karl Pitscheider |
| Finite
Element Stress Analysis of Welded Seal Closures S.H. Cavata, L.M. Bezerra, S.V.G. Ribeiro |
| A
Parametric Study of Contact Problem on a Large Size Flange A.B. Mukherjee, T. Narayanan, J.K. Dhondkar, V.K. Mehra |
Return to SMiRT 10 TOC