10th International Conference on 
Structural Mechanics in Reactor Technology


 

DIVISION Q: CONCRETE AND SPECIFIC ASPECTS OF
NON-METALLIC MATERIALS


(The papers with links are those received by the SMiRT 10 Secretariat at the time the Transactions went to press)


Q01: Fracture and Stability Aspects

Stable Propagation of Interacting Crack Systems and Modeling of Damage
Zdenek P. Bazant, Mazen R. Tabbara

A Model for Describing Both the Anisotropic and Uniaxial Distributed Damage in Concrete
S. Ramtani, Y. Berthaud, J. Mazars
Fracture Resistance Testing of Concrete and Rocks
Minh Phong Luong

Q02: Cracking and Uniaxial Failure Criteria

Uniaxial Strength and Deformation of HTR-Concrete at High Temperature up to 600°C
U. Diederichs, F.S. Rostásy, G. Becker
Fracture and Aggregate Interlock Mechanisms in Reinforced Concrete
Pietro G. Gambarova, Gianfranco Valente
Prediction of Concrete Strength in Massive Structures
Tetsuro Sakamoto, Hiroyasu Makino, Sunao Nakane, Tohru Kawagushi, Takeshi Ohike
Restraint Behaviour of Concrete Under Extreme Thermal and Hygral Conditions
Peter Schwesinger, Frank Dommnich
Computation of Shrinkage Stresses in Prestressed Concrete Containments
Rui-Feng Wu, Huajiang Ouyang
Numerical and Experimental Studies Concerning New Failure Criteria for Reinforced Concrete Elements
N. Mihalache, V.F. Poterasu, Al. Secu

Q03: Thermal Effects, Creep and Moisture Transfer

Heat and Mass Transfer in a Concrete Pressure Vessel
K. Zängle, H. Sadouki, F.H. Wittmann

Concrete Containment Analysis Including Thermal Effects
P.A. Pfeiffer, J.M. Kennedy, A.H. Marchertas
Numerical Evaluation of Drying Test Data
X. Wittmann, H. Sadouki, F.H. Wittmann
Effect of the type of Mineral Aggregate on the High-Temperature Creep of HTR-Concrete
U. Diederichs, G. Becker
Transient Creep of PCRV-Concrete Subjected to Biaxial Stress and Elevated Temperature
K.-Ch. Thienel, F.S. Rostásy, K. Hinrichsmeyer, U. Diederichs
Creep Behavior of Concrete under Triaxial Compressive Stresses
S. Stöckl, N. Lanig, H. Kupfer
Constitutive Model of the Multiaxial Strength of Concrete at High Temperature
K.-Ch. Thienel, F.S. Rostásy, U. Diederichs

Q04: Strain-Rate Effects and Failure Models

Behavior of Concrete at High Rate of Loading
David Murià Vila, Patrice Hamelin

An Improved Model for Considering Strain Rate Effects on Reinforced Concrete Elements Behavior under Dynamic Loads
Jongsung Sim, Parviz Soroushian

Q05: Material and Structural Aspects of Concrete

Displacement Field and Subgrade Stiffness of a Concrete-Embedded Bar Acting as a Dowel
S. Dei Poli, M. Di Prisco, P.G. Gambarova, S. Ottanà
Shear Transfer of Reinforced Concrete at Elevated Temperature
Hiroaki Ishida, Tsutomu Kanazu, Yukio Aoyagi
Long-Term Tests of Reinforced Concrete Beams Loaded by Temperature Gradient or Settlement of a Support
Jukka Jokela
Experimental Study of Leakage Through Residual Shear Cracks on R/C Walls
T. Nagano, A. Kowda, T. Matumura, Y. Inada, K. Yajima
Experimental Study on the Leakage of Gas Through Cracked Concrete Walls
Toshiro Suzuki, Katsuki Takiguchi, Hisato Hotta, Naoki Kojima, Masashi Fukuhara, Katsuji Kimura

Q06: Strain-Rate Effects and Failure Models

Nonlinear Analysis of Anchorages Under Tensile Loading
F. Stangenberg, D. Jankowski, U.G. Herzbruch
Infrared Detection of Defects in Concrete and Rocks
Minh Phong Luong
Acoustic Emission Measurement of Concrete Under High Loading Rates
Manfred Curbach, Przemyslaw Maliszkiewicz, Josef Eibl

 

Return to SMiRT 10 TOC